@article { author = {Akbari, Jalal and Mikhidoz, Mohammad}, title = {Seismic Evaluation of Reinforced Concrete Frames Using Forced-Based and Energy-Based Methods}, journal = {Bulletin of Earthquake Science and Engineering}, volume = {5}, number = {4}, pages = {115-129}, year = {2018}, publisher = {International Institute of Earthquake Engineering and Seismology}, issn = {2476-6097}, eissn = {2476-6100}, doi = {}, abstract = {One of the novel methods for design of civil engineering structures is energy based design approach. In this method, by determining the input energy and balancing between the accomplished works by the members of structures under a pre-determined mechanism, the base shear is calculated, and structures are re-designed. From the beginning of the design, selection of the appropriate mechanism and determining the target drift are the main advantages of this approach. Furthermore, compared with forced-based design method, removing the undesirable mechanisms is the superiority of this method. In this paper, reinforced concrete frames have been designed using Iranian concrete code (ABA) and energy method (weak beam-strong column). The main difference between two approaches is the calculation of base shear of structures. Unlike the force-based method, energy method does not directly use the force reduction factor (R). In this research, 4, 7 and 12-story special reinforced concrete frames have been designed using force-based and energy-based methods, and then for seismic evaluation of the frames; nonlinear static and dynamic analyses have been conducted. The results show that for designed structures using energy method, the relative displacements of the stories are uniform, and the plastic hinges have been appeared in the beams. For frames designed by energy method, whole structural capacities are participated in the earthquake energy dissipation process.}, keywords = {Energy method,Force Based Method,Desirable Mechanism,Weak Beam - Strong Column,Energy Dissipation}, title_fa = {ارزیابی رفتار لرزه‌ای قاب‌های بتنی مسلح طراحی شده با روش‌های نیرو و انرژی}, abstract_fa = {یکی از روش‌های نوین طراحی سازه‌ها، طراحی بر اساس روش انرژی می‌باشد. در این روش با تعیین انرژی‌های ورودی، کارهای داخلی انجام شده توسط اعضای سازه و تعادل بین آنها تحت یک مکانیسم مطلوب از پیش تعیین‌شده برش پایه سازه محاسبه و طراحی مجدد سازه انجام می‌شود. انتخاب مکانیسم مطلوب از شروع طراحی و تعیین تغییر مکان هدف و حذف مکانیسم‌های گسیختگی نامطلوب از برتری‌های این روش می‌باشد. در این مقاله به طراحی قاب‌های خمشی بتنی ویژه به روش نیرو بر اساس آیین‌نامه بتن ایران و روش انرژی (مکانیسم تیر ضعیف- ستون قوی) پرداخته شده است. تفاوت اساسی دو روش در محاسبه برش پایه و توزیع آن در ارتفاع سازه می‌باشد. برخلاف روش نیرو که محاسبه برش پایه بیشتر بر ضریب رفتار سازه متکی است، در روش انرژی نیازی به اعمال مستقیم ضریب رفتار نیست. در این مقاله سازه‌های چهار، هفت و دوازده طبقه به روش‌های نیرو طراحی شده و سپس با طراحی مجدد سازه‌ها بر اساس مفاهیم روش انرژی، آنها تحت تحلیل‌های استاتیکی و دینامیکی غیرخطی قرار گرفته‌اند. نتایج نشان می‌دهد در سازه‌های طراحی شده به روش انرژی، جابه‌جایی نسبی طبقات یکنواخت‌تر و تشکیل مفاصل پلاستیک مطلوب‌تر بوده است. همچنین نتایج نشان می‌دهد که در سازه‌های طراحی شده به روش انرژی از تمام ظرفیت سازه برای استهلاک زلزله استفاده شده است.}, keywords_fa = {روش انرژی,روش نیرو,مکانیسم مطلوب,تیر ضعیف- ستون قوی,استهلاک انرژی}, url = {http://www.bese.ir/article_240365.html}, eprint = {http://www.bese.ir/article_240365_7ffeff5e5a5d4b470b3c0925d1d1364f.pdf} }