Bhagat, S., & Wijeyewickrema, A. C. (2017). Seismic response evaluation of base-isolated reinforced concrete buildings under bidirectional excitation. Earthquake Engineering and Engineering Vibration, 16(2), 365-382. doi: 10.1007/s11803-017-0387-8
Building and Housing Research Center. (2014). Iranian Code of Practice for Seismic Resistant Design of Buildings (Standard No. 2800, 4th ed.) (in Persian).
Chopra, A. K., & Goel, R. K. (2002). A modal pushover analysis procedure for estimating seismic demands for buildings. Earthquake Engineering and Structural Dynamics, 31(3), 561-582.
Chopra, A. K., & Goel, R. K. (2004). A modal pushover analysis procedure to estimate seismic demands for unsymmetric-plan buildings. Earthquake Engineering and Structural Dynamics, 33(8), 903-927.
Computers and Structures, Inc. (2019). ETABS: Integrated Software Package for the Structural Analysis and Design of Buildings [Computer software].
Dusicka, P., & Iwai, R. (2007). Development of linked column frame system for seismic lateral loads. In Structural Engineering Research Frontiers, 1-13. ASCE. doi: 10.1061/40944(249)63
Dusicka, P., & Lewis, G. (2010). Investigation of replaceable sacrificial steel links. In Proceedings of the 9th US National and 10th Canadian Conference on Earthquake Engineering, 1659. doi: 10.22059/ceij. 2019.280596.1580
Fathi, M., Makhdoumi, A., & Parvizi, M. (2015). Effect of supplemental damping on seismic response of base isolated frames under near and far field accelerations. KSCE Journal of Civil Engineering, 19(5), 1359-1365. doi: 10.1007/s12205-014-0101-6
Federal Emergency Management Agency. (2000). Pre-Standard and Commentary for the Seismic Rehabilitation of Buildings (FEMA-356).
Ghodrati Amiri, G., & Rajabi, E. (2017). Damage evaluation of reinforced concrete and steel frames under critical successive scenarios. International Journal of Steel Structures, 17(4), 1495-1514. doi: 10.1016/j. istruc.2021.06.005
Gholhaki, M., Eshrafi, B., Azandariani, M. G., & Rezaifar, O. (2021). Seismic assessment of linked-column frame structural system considering soil-structure effects. Structures, 33, 2264-2272. doi: 10.1016/j.istruc.2021.06.005
Gholhaki, M., Foroozan, F., & Rezayfar, O. (2020). A study on the performance-based seismic design of linked column frame (LCF) system subjected to near and far-field earthquakes. Journal of Structural and Construction Engineering, 7(Special Issue 2), 194-215. doi: 10.22065/jsce.2019.154693.1698
Golestani, Y., Rajabi, E., & Rajabi Soheyli, R. (2022). Effect of seismic sequence on the deflection amplification factor of steel frames with "linked columns frame" system. Modares Civil Engineering Journal, 22(5), 125-140. doi: 10.22034/22.5.125 (in Persian).
Golestani, Y., Rajabi, E., & Soheyli, R. R. (2023). Evaluation of the response modification factor of steel buildings with linked columns frame system. Soil Dynamics and Earthquake Engineering, 164, 107581. doi: 10.1016/j.soildyn.2022.107581
Hu, S., & Wang, W. (2021). Seismic design and performance evaluation of low-rise steel buildings with self-centering energy-absorbing dual rocking core systems under far-field and near-fault ground motions. Journal of Constructional Steel Research, 179, 106545. doi: 10.1016/j.jcsr.2021.106545
Instruction for Seismic Rehabilitation of Existing Buildings (Publication No. 360, First Issue). (2014) (in Persian).
Jaberi, V., & Asghari, A. (2022). Seismic behavior of linked column system as a steel lateral force resisting system. Journal of Constructional Steel Research, 196, 107428. doi: 10.1016/j.jcsr.2022.107428
Khazaei, M., Vahdani, R., & Kheyroddin, A. (2021). Investigation of the effects of multiple tuned mass damper on reduction of seismic parameters of tall buildings regular and irregular on plan in steel flexible structures under near and far-fault earthquakes. Journal of Structural and Construction Engineering, 8(2), 244-263. doi: 10.22065/jsce.2019.176558.1811
Ministry of Roads and Urban Development Research Center. (2019). Design Loads for Buildings (6th National Regulation, Version 4.0) (in Persian).
Pacific Earthquake Engineering Research Center. (2006). OpenSees: Open System for Earthquake Engineering Simulation (Version 2.4.0) [Computer software]. University of California, Berkeley.
Pacific Earthquake Engineering Research Center. (n.d.). PEER Ground Motion Database. Retrieved from http://peer.berkeley.edu/
Sadeghi, A., Hashemi, S. V., & Mehdizadeh, K. (2020). The performance investigation of deformation and energy parameters in seismic damage assessment of steel structures. Journal of New Approaches in Civil Engineering, 3(4), 1-23. doi: 10.30469/jnace.2020. 109329
Roufaiel, M. S. L., & Meyer C., (1987). Analytical Modelling of Hysteretic Behavior of R/C Frames, Journal of Structure Engineering, 113, 3, 429-444.
Shahsavari, M., & Eslami, S. S. (2022). Investigation of the effect of using viscous dampers on the seismic performance of steel flexural frames under the effect of seismic sequence phenomenon in the near-fault area. Journal of New Approaches in Civil Engineering, 5(4), 14-39. doi: 10.30469/jnace.2022.150299 (in Persian).
Sharma, V., Shrimali, M. K., Bharti, S. D., & Datta, T. K. (2020). Behavior of semi-rigid steel frames under near- and far-field earthquakes. Steel and Composite Structures, 34(5), 625-641. doi: 10.12989/scs.2020. 34.5.625
Sharma, V., Shrimali, M. K., Bharti, S. D., & Datta, T. K. (2021). Seismic fragility evaluation of semi-rigid frames subjected to near-field earthquakes. Journal of Constructional Steel Research, 176, 106384. doi: 10.1016/j.jcsr.2020.106384
Shoeibi, S., Kafi, M. A., & Gholhaki, M. (2018). Performance-based seismic design and parametric assessment of linked column frame system. Periodica Polytechnica Civil Engineering, 62(3), 555-569. https://doi.org/10.3311/PPci.10920
Tajammolian, H., Khoshnoudian, F., & Loghman, V. (2017). Rotational components of near-fault earthquakes effects on triple concave friction pendulum base-isolated asymmetric structures. Engineering Structures, 142, 110-127. doi: 10.1016/j.engstruct. 2017.03.042
Tazarv, J., & Mohebkhah, A. (2022). Evaluation of direct displacement-based designed linked column steel frame (LCF) systems. Amirkabir Journal of Civil Engineering, 53(11), 4809-4830. doi: 10.22060/ceej. 2020.18551.6898
Vahedian, V., Abdollahzadeh, G., & Hamidi, H. (2021). Effect of mainshock-aftershock sequences on the inelastic displacement ratios. Journal of Structural and Construction Engineering, 8(5), 279-295. doi: 10.22065/jsce.2019.200979.1944
Wang, L., Zhou, Y., Shi, W., & Zhou, Y. (2023). Seismic response control of a nonlinear tall building under mainshock-aftershock sequences using semi-active tuned mass damper. International Journal of Structural Stability and Dynamics, 23(16), Article 2340027. doi: 10.1142/S0219455423400278
Zamanian, M., Kheyroddin, A., & Mortezaei, A. (2022). Study on passive and semiactive control systems in structures under near and far field earthquakes. Shock and Vibration, 2022, Article 1103434. doi: 10.1155/2022/1103434
