Signatures of Deformation Related to the Plio-Quaternary State of Stress in the Mahneshan–Mianeh Basin (NW Iran)

Document Type : Articles

Authors

1 Department of Earth Sciences, Institute for Advanced Studies in Basic Sciences, Zanjan

2 Department of Geology, Imam Khomeini International University, Qazvin

Abstract

Since the last two decades, the inversion of fault kinematics combined with geodetic and geophysical data has led to the better understanding of the geodynamics of the Arabia –Eurasia collision, as well as the tectonic history of Iran. These researches indicate that dynamics of ongoing deformation in the most parts of the Iranian plateau and surrounding deformation belts is controlled by the NNE-to NE-trending Arabia –Eurasia convergence. This general pattern of deformation has been affected by local-and regional-scale geodynamic elements (e.g., the rigid South Caspian Basin, Persian and Anatolian extruding blocks) producing complex stress and strain fields in distinct tectonic zones such as northwestern Iran and the region surrounding the South Caspian Basin. Accordingly, two drastically different stress fields prevail in either sides of the North Tabriz fault such that the NW-trending horizontal compression in the northern part changes into the NE direction in the southern regions; the type and boundaryof this change remain unknown. Every kinematic and structural investigation in NW Iran would help to determine the boundary condition and characteristics of this significant geodynamic complexity. The Mahneshan–Mianeh Cenozoic basin, located at the transition of the two aforementioned tectonic provinces, is a key area providing crucial data for this geodynamic issue. This area, which is also called “Folded Miocene Belt”, is a NW-trending fault-bounded narrow basin developed in the hinterland of the NW-trending Zagros orogen. The Late Miocene detritic sedimentary sequence of the Upper Red Formation constitutes the dominant outcrops of the basin. The sequence is unconformably overlaid by Late Miocene conglomerate to Pliocene-Quaternary deposits. Main geological structures of the basin are NW-trending detachment folds evolved in the fault-related folds in hanging wall of shallow reverse faults. This structural assemblage has been produced and evolved by different stress states during the Late-Miocene compressional tectonic regime. The original data presented in this paper are based on the remote-sensing analysis of satellite imageries and structural field surveys including the study of folding stages, folding interference patterns and faulting trends. These are complemented by the measurement of folds geometry and fault kinematics data collected in 25 sites throughout the area of interest. The inversion of fault kinematics data allowed us to investigate the post-Miocene tectonic regimes affecting the area. Thesorting and separation of the kinematics data has been done considering relative age relationships of fault planes and their striations (e.g. using cross-cutting and superposition relationships). FCALC software is used for the inversion analysis, with especial attentions to the rules of data separation, rotation and geological considerations recommended in fault inversion processes.The inversion of fault slip data related to the youngest tectonic regime leads to the determination of the present-day state of stress characterized by a NE-trending maximum horizontal compression. The penultimate Pliocene –Quaternary state of stress (paleostress field) was investigated after the removing of kinematic signatures of the youngest tectonic regime. The Pliocene –Quaternary paleostress state is characterized by a compressional tectonic regime with ~N138E direction of maximum horizontal compression, which is compatible with the results of previous researches in surrounding areas. The study of surface folding patterns and geometry of folds indicates superposition of the Late-MioceneNW-trending fold set by a younger sub-vertical NE-trending fold set. This second folding stage is especially developed in northern and central parts of the basin, in Pliocene –Quaternary geological units. Superposition of these folding geometries results in the formation of basin and dome and boomerang interference patterns, which are clearly visible in satellite imageries. The penultimate Pliocene –Quaternary stress field (NW-trending compression) is responsible for the formation of the last NE-trending folding stage. This paleostress field was changed into a modern compressional stress state characterized by a NE-trending regional compression. The modern stress state of the Mahneshan –Mianeh basin is well consistent with the overall direction of the Arabia –Eurasia convergence and clearly discriminates the ongoing kinematic characteristics of the area of interest from the region to the north of the North Tabriz fault. This puts the boundary of these distinct tectonic domains to the vicinity of the North Tabriz fault.

Keywords

References

  1. Authemayou, C., Chardon, D., Bellier, O., Malekzadeh, Z., Shabanian, E. and Abbasi, M.R. (2006) Late Cenozoic partitioning of oblique plate convergence in the Zagros fold-and-thrust belt (Iran). Tectonics, 25, TC3002.
  2. Navabpour, P., Angelier, J., and Barrier, E. (2007) Cenozoic post-collisional brittle tectonic history and stress reorientation in the High Zagros Belt (Iran, Fars Province). Tectonophysics, 432, 101–131.
  3. Navabpour, P., Angelier, J., and Barrier, E. (2011) Brittle tectonic reconstruction of palaeo-extension inherited from mesozoic rifting in west Zagros (Kermanshah, Iran). Journal of Geological Society, London, 168, 979-994.
  4. Zanchi, A., Berra, F., Mattei, M., Ghassemi, M.R., and Sabouri, J. (2006) Inversion tectonics in central Alborz, Iran. Journal of Structural Geology, 28, 2023-2037.
  5. Shabanian, E., Bellier, O., Abbassi, M., Siame, L., and Farbod, F. (2010) Plio-Quaternary stress states in NE Iran: Kopeh Dagh and Allah Dagh-Binalud mountain ranges. Tectonophysics, 480, 280–304.
  6. Javidfakhr, B., Bellier, O., Shabanian, E., Siame, L., Leanni, L., Bourlès, D., and Ahmadian, S. (2011) Fault kinematics and active tectonics at the southeastern boundary of the eastern Alborz (Abr and Khij fault zones): geodynamic implications for NNE Iran. Journal of Geodynamics, 52(3–4), 290–303.
  7. Regard, V., Bellier, O., Thomas, J.-C., Abbassi, M.R., Mercier, J., Shabanian, E., Feghhi, K., and Soleymani, S. (2004) Accommodation of Arabia-Eurasia convergence in the Zagros-Makran transfer zone, SE Iran: A transition between collision and subduction through a young deforming system. Tectonics, 23, TC4007.
  8. Dolati, A. and Burg, J.P. (2013) ‘Preliminary fault analysis and paleostress evolution in the Makran Fold-and-Thrust Belt in Iran’. In: Lithosphere Dynamics and Sedimentary Basins: The Arabian Plate and Analogues, Part of the series Frontiers in Earth Sciences, 261-277.
  9. Kargaranbafghi, F., Franz Neubauer, F., and Genser, J. (2011) Cenozoic kinematic evolution of southwestern Central Iran: Strain partitioning and accommodation of Arabia–Eurasia convergence. Tectonophysics, 502, 221-243.
  10. Salmanlu, A. (2015) Late Cenozoic Change in the Stress State of the Zanjan Region; Implications for the Geodynamics of NW Iran. B.Sc. Thesis, Bu-Ali Sina University, Hamedan, Iran, 193 p (in Persian).
  11. Aflaki, M., Shabanian, E., Dvoodi, Z. (2016) Quaternary stress state in Mahneshan-Mianeh Cenozoic sedimentary basin (NW Iran), deduced from fault kinematics data. 34th Geosciences congress, Geological Society of Iran, Tehran (in Persian).
  12. Ghods, A., Shabanian, E., Bergman, E., Faridi, M., Donner, S., Mortezanejad, G., and Aziz-Zanjani, A. (2015) The Varzaghan–Ahar, Iran, Earthquake Doublet (Mw 6.4, 6.2): implications for the F., Guliev, I., Stepanyan, R., Nadariya, M., Hahubia, G., Mahmoud, S., Sakr, K., ArRajehi, A., Paradissis, D., Al-Aydrus, A., Prilepin, M., Guseva, T., Evren, E., Dmitrotsa, A., Filikov S.V., Gomez, F., Al-Ghazzi, R. and Karam, G. (2006) GPS constraints on continental deformation in the Africa-Arabia-Eurasia continental collision zone and implications for the dynamics of plate interactions. Journal of Geophysical Research, 111, B05411.
  13. Regard, V., Hatzfeld, D., Molinaro, M., Aubourg, C., Bayer, R., Bellier, O., Yamini-Fard, F., Peyret, M., and Abbasi, M. (2009) The transition between Makran subduction and the Zagros collision: recent advances in its structure and active deformation. Geological Society, London, Special Publications, 330, 43-64.
  14. Vernant, P. and Chery, J. (2006) Low fault friction in Iran implies localized deformation for the Arabia–Eurasia collision zone. Earth and Planetary Science Letters, 246, 197–206.
  15. Djamour, Y., Vernant, P., Nankali, H.R., and Tavakoli, F. (2011) NW Iran-eastern Turkey present-day Kinematics: Results from the Iranian permanent GPS network. Earth and Planetary Science Letters, 307, 27-34.
  16. Mousavi, Z., Walpersdorf, A., Walkerc, R.T., Tavakoli, F., Pathier, E., Nankali, H., Nilfouroushan, F., and Djamour, Y. (2013) Global Positioning System constraints on the active tectonics of NE Iran and the South Caspian region. Earth and Planetary Science Letters, 287-298.
  17. Zarifi, Z., Nilforoushan, F., and Raeesi, M. (2014) Crustal Stress Map of Iran: Insight from Seismic and Geodetic Computations. Pure and Applied Geophysics, 171, 1219-1236.
  18. Masson, F., Lehujeur, M., Ziegler, Y., and Doubre, C. (2014) Strain rate tensor in Iran from a new GPS velocity field. Geophysical Journal International, doi: 10.1093/gji/ggt509.
  19. Allen, M.B., Ghassemi, M.R., Shahrabi, M., and Qorashi, M. (2003) Accommodation of late
  20. geodynamics of northwest Iran. Geophysical Journal International, 203, 522-540.
  21. Azad, S.S., Ritz, J.F., and Abbassi, M.R. (2011) Left-lateral active deformation along the Mosha–North Tehran fault system (Iran): Morphotectonics and paleoseismological investigations. Tectonophysics, 497(1), 1-14.
  22. Azad, S.S., Philip, H., Dominguez, S., Hessami, K., Shahpasandzadeh, M., Foroutan, M., Tabassi, H., and Lamothe, M. (2015) Paleoseismological and morphological evidence of slip rate variations along the North Tabriz fault (NW Iran). Tectonophysics, 640, 20-38.
  23. Nilforoushan, F., Masson, F., Vernant, P., Vigny, C., Martinod, J., Abbassi, M., Nankali, H., Hatzfeld, D., Bayer, R., Tavakoli, F., Ashtiani, A., Doerflinger, E., Daignieres, M., Collard, P., and Chery, J. (2003) GPS network monitors the Arabia-Eurasia collision deformation in Iran. Journal of Geodesy, 77, 411–422.
  24. Vernant, P., Nilforoushan, F., Hatzfeld, D., Abbassi, M.R., Vigny, C., Masson, F., Nankali, H., Martinod, J., Ashtiani, A., Bayer, R., Tavakoli, F., and Ch´ery, J. (2004) Present-day crustal deformation and plate kinematics in the Middle East constrained by GPS measurements in Iran and northern Oman. Geophys. J. Int., 157, 381–398.
  25. Masson, F., Djamour, Y., Van Gorp, S., Chery, J., Tatar, M., Tavakoli, F., Nankali, H., and Vernant, P. (2006) Extension in NW Iran driven by the motion of the South Caspian Basin. Earth and Planetary Science Letters, 252, 180–188.
  26. Regard, V., Bellier, O., Thomas, J.-C., Bourlès, D., Bonnet, S., Abbassi, M.R., Braucher, R., Mercier, J., Shabanian, E., Soleymani, Sh., and Feghhi, Kh. (2005) Cumulative right-lateral fault slip rate across the Zagros–Makran transfer zone: role of the Minab–Zendan fault system in accommodating Arabia–Eurasia convergence in southeast Iran. Geophys. J. Int., 162, 177–203.
  27. Reilinger, R., McClusky,S., Vernant, P., Lawrence, S., Ergintav, S., Cakmak, R., Ozener, H., Kadirov,
  28. Cenozoic oblique shortening in the Alborz range, northern Iran. Journal of Structural Geology, 25, 659-672.
  29. Ritz, J., Nazari, H., Ghassemi, A., Salamati, R., Shafei, A., Solaymani, S., and Vernant, P. (2006) Active transtension inside central Alborz: A new insight into northern Iran–southern Caspian geodynamics. Geology, 34, 477–480.
  30. Westaway, R. (1994) Present-day kinematics of the Middle East and eastern Mediterranean. J. Geophys. Res., 99(B6), 12071–12090.
  31. Afshar, F.A. (1965) Geology of Mianeh district of Northwestern Iran. Bull. Min. Res. Expl. Inst. Turkey, 64, 57-72.
  32. Emami, M.H. (1990) Geological map of Mianeh quadrangle. Geological Survey of Iran, Tehran, scale 1:100,000.
  33. Lotfi, M. (2001) Geological map of Mahneshan quadrangle. Geological Survey of Iran, Tehran, scale 1:100,000.
  34. Ballato, P., Cifelli, F., Heidarzadeh, G., Ghassemi, M.R., Wickert, A.D., Hassanzadeh, J., Dupont-Nivet, G., Balling, P., Sudo, M., Zeilinger, G., Schmitt, A.K., Mattei, M., and Strecker, M.R. (2017) Tectono-sedimentary evolution of the northern Iranian Plateau: insights from middle–late Miocene foreland-basin deposits. Basin Res., 29(4), 417–446, doi:10.1111/bre.12180.
  35. Baghernejhad, M., Ghassemi, M.R., and Oveisi, B. (2014) Detachment folding in Mianeh-Mahneshan area: Interaction between sedimentation in the Upper Red Formation basin and shortening. Geosciences, 24(95), 169-180.
  36. Carey-Gailhardis, E. and Mercier, J.L. (1987) A numerical method for determining the state of stress using focal mechanisms of earthquake populations: Application to Tibetan teleseisms and icroseismicity of southern Peru. Earth Planet. Sci. Lett., 82(1), 165-179.
  37. Ritz, J.F. and Taboada, A. (1993) Revolution stress ellipsoids in brittle tectonics resulting from an uncritical use of inverse methods. Bull. Soc. Geol. France, 164, 519-531.
  38. Bellier, O. and Zoback, M.L. (1995) Recent state of stress change in the Walker Lane zone,western Basin and Range province, United States. Tectonics, 14, 564–593.
  39. Abbasi, M.R. and Shabanian, E. (1999) Evolution of the stress field in Tehran region during the quaternary. Proceeding of Third International Conference on Seismology and Earthquake Engineering (SEE-3), 67-84.
  40. Abbasi, M.R. and Shabanian, E. (2005) Determination of stress state and direction by inversion of fault-slip data in the southern flank of Central Alborz. Geosciences, 55, 2-18 (in Persian).
  41. Abbassi, M.R., Mokhtari, H. (2016) Investigation of Morphological Features and Faulting Mechanisms of NW-Striking Faults Affecting Alluvial Deposits in Tehran’s Piedmont. Bulletin of Earthquake Science and Engineering, 3(1), 1-15.

Files

History

  • Receive Date: 27 November 2016
  • Revise Date: 24 February 2021
  • Accept Date: 26 December 2020

Share

How to cite

Statistics